Categories

MS Vessel

Ankleshwar
ROYAL ENGINEERING HUB
Machinery
Machinery & Equipments
Capacity >10000 L
Material Mild Steel
Usage/Application FOR CHEMICAL STORGE/WATER STORAGE
Storage Material Oil
Max Design Pressure 10-15 bar
Material Grade IS 2062
Gases Used Oxygen
Surface Finish RED OXIDE 02 COATED. WITH PAINT.
Orientation Horizontal Orientation

MS WITH RUBBER LINING /MS WITH FRP/MS WITE PPE AS PER CLIENT REQ. LUG TYPE LEG TYPE. WITH JACKET WITHOUT JACKET.


Additional Information:
  • Item Code: REH-MS-TANK
  • Production Capacity: 500 LTR TO 50 KL
  • Delivery Time: 6 WEEK
  • Packaging Details: AS PER CLIENT REQ.


 
View More Photos and Information

30 KL Jacketed Reactors

Ankleshwar
ROYAL ENGINEERING HUB
Machinery
Machinery & Equipments
Max Pressure 15 Kg
Material Stainless Steel
Capacity 30 KL
Material Grade SS304/SS316/MS
Features Vertical Orientation
Country of Origin Made in India

30 KL Jacketed Reactors
View More Photos and Information

SS Chemical Receiver

Ankleshwar
ROYAL ENGINEERING HUB
Machinery
Machinery & Equipments
Material SS/MS
Capacity as client requirements
Pressure Range 100 psi
Country of Origin Made in India
Thickness 6mm
Air Flow 50 m3/MIN
Surface Finishing Polished
No Of Leg 4

SS RECIEVER AS PER CLIENT SPESIFICATION  50 LTR 1000 LTR.SS316/SS316L/SS304
View More Photos and Information

22.5 KL GMP Chemical Reactors

Ankleshwar
ROYAL ENGINEERING HUB
Machinery
Machinery & Equipments
Model Name/Number REACTOR LIMPET/JACKET.
Usage/Application CHEMICAL
Capacity 22.5KL
Max Pressure 3-6 kg, 20 Kg
Material Stainless Steel, SS316/SS304/MS/MSRL
Automation Grade Manual
Max Temperature 200 Degree
Size/Dimension 22.5 KL GMP MODEL.
Beater AS PER CLIENT.
Blister Size AS PER CLIENT.
Contact Parts JIGNESH BHAI
Design ANCHOR
Material Grade SS316/SS316L/SS304/MS/MSRL.
Phase 3
Technique Hot Rolled
Country of Origin Made in India
Surface Finish Polished

REACTOR WITH JACKET AND INSULATION ANF GMP. MOC SS316/SS304/SS202  AS PER CLIENT REQ. FLP MOTOR WITH MECHENICAL SEAL.


Additional Information:
  • Production Capacity: 22.5 KL.
  • Delivery Time: 6 WEEK
  • Packaging Details: REACTOR WITH JACKET AND LIMPET SS316/SS304/SS316L/MS/MSRL/TEFLON COATING.

 
View More Photos and Information

Reactor

Ankleshwar
ROYAL ENGINEERING HUB
Machinery
Machinery & Equipments
Capacity 0.5KL TO 20 KL
Material SS316/SS304/MS/MSRP
Usage/Application Reaction
Material Grade SS316/SS304/SS316L/MS/MSRL
Mixing Arrangement AGITATOR AS PER CLIENT SPECIFICATION.
Max Design Pressure 10-15 bar
Max Pressure 3-6 kg
Automation Grade Manual
Features BEST DESIGN AS PER CLIENT PROCESS.
Reactor Orientation AS PER CLIENT PROCESS.
Size AS PER CLIENT SIDE.

REACTOR 0.5 KL TO 50 KL/ MOC -SS316/SS316L/SS304/MS/MSRL/MS WITH FRP.  JACKET OR LIMPET/ SEAL OR GLAND/ FLP OR NFLP/ AGITATOR AS PER CLINET REQ


Additional Information:
  • Item Code: REH-RECTOR
  • Production Capacity: 0.5 KL TO 50KL
  • Delivery Time: 6 WEEK
  • Packaging Details: AS PER CLIENT REQ.

 
View More Photos and Information

Hybrid Evaporator

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
Depending upon the process conditions, the type of evaporator is selected. Many a times, combination of stages is reuired or Hybrid evaporators are designed based on the process progress.

Steam is normally the heating media, however, thermic fluid and other sources are also used. Waste heat recovery heat exchagers can also be offered
View More Photos and Information

Vibratory Fluid Bed Dryer - Continuous type

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
ACMEFIL Fluid Bed processing includes Drying as well as granulation, agglomeration and coating of particulate materials.

It is designed to uniform drying of the material at low temperature and is ideal for a wide range of both heat sensitive and non-heat sensitive prodcts for low moist powder.

In case of fluid bed coater cum granulator, agglomeration and granulation may be performed in a number of ways depending upon the feed to be processed and the product properties to be achieved.

Fluid bed coating of powders, granules involves the spraying of a liquid on the fluidised powder under strictly controlled conditions. We offer fluid bed drying system made up of S.S.304 / S.S. 316 with GMP standards. The complete unit is supplied with suitable motor, blower, filters, filter bag, & control panel. Heating system will be provided as per customer requirement i.e. Steam / Electric Heating system and any other.
 
View More Photos and Information

High Temp Spray Dryer

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
High Temp Spray Dryer are used for evaporating effluent having COD / BOD, there by reducing the effluent load and treated as zero discharge system.
View More Photos and Information

Flash Dryer

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
This is a system in which the product to be dried is fed by means of screw conveyor in to the flash drying venturi. The high velocity drying air passes through the venturi comes in contact with the feed product and accelerates the product through the drying duct. The entire drying process taken place while the product travels through the duct and the dried product is separated from the air by a high efficiency cyclone separator and Bag filters.
View More Photos and Information

Spin Flash Dryer

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
Spin flash dryer is a easy process for drying Filter Cakes, Pastes and high Viscous liquid. 

Advantages: 
  1. Material is directly fed from filter press to dryer.
  2. Less drying time hence less labour handling and quick production.
  3. Less electricity load
  4. Space is 1/3  that of Spray dryer
  5. Various product range.
  6. Energy consumption saving.
  7. Fuel consumption saving.
  8. Influence of heat on heat sensitive products is remarkably low even at high temperature.
  9. Lump breaker with variable speed feed screw feeder for non clogging of feed.
  10. Only two operators are required to operate the plant instead of number of labourers in conventional drying system.
  11. The environmental conditions remain clean.

PROCESS:
The product is fed to the feed Agitator which is connected to a variable speed screw conveyor and conveyed to the Spin flash chamber in a rated capacity. The air is heated by passing over indirect fired hot air generator. The material come to the spin flash chamber get disintegrated between the rotating spins and simultaneously dried within the hot air media. Dried product is collected from the bottom of bag filter. A separate control panel mounted with instruments is also provided. The process is displayed by MIMIC diagram on control panel.

The material of construction of equipment depends on the product to be dried. The advantage of the system is that it can be operated at high temperature for non sensitive products.

 
View More Photos and Information

Spray Dryer

Ahmedabad
ACMEFIL ENGINEERING SYSTEMS PVT LTD
Machinery
Machinery & Equipments
Spray drying is the transformation of feed from a fluid state into a dried particulate form by spraying feed into a hot drying medium.

PROCESS OPERATION

Spray drying system consists of four process stages. 
  • Atomization of feed into a spray. 
  • Spray - Air contact 
  • Drying of spray 
  • Separation of dried product from the air. 
The feed is pumped from the product feed tank to the Atomizer system which is located within a ceiling air disperser through which drying air enters the drying chamber. The air is drawn from atmosphere by   a supply air blower and passed through an indirect Hot Air Generator. As and when the drying air comes in contact with the spray, evaporation starts and dried powder particles falls to the base of the chamber.  The exhaust air passed to the atmosphere via exhaust air blower and Wet scrubber.

Adequate instrumentation is given for temperature control, chamber pressure control, air damper systems for adjusting the air flows, speed controller for feed pump etc.
 
View More Photos and Information

PP Foot Valve

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Material HDPE
Size 25mm
Usage/Application Plumbing
Head Shape Round
Pressure 20 Bar

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

2inch HDPE Tailpiece

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Size/ Diameter 40mm
Size 2 inch
Material HDPE
Fitting Type Tail Piece
Usage/ Application Plumbing
Color Black
Head Shape Round

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

Plastic Black Welding Rod

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Material Plastic
Application/Usage Fabrication
Color Black
Diameter 30mm
Weight 112g

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

PP Level Indicator Valve

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Material PP
Usage/Application Industrial
Pressure 20 Bar
Valve Size 1/2 inch
Color White
Uses Plumbing

we ensure to timely deliver these products to our clients, through this we have gained a huge client base in the market.
View More Photos and Information

HDPE Ball Valve

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Usage/Application Gas
Connector Type Flanged End
Material HDPE
Size 15 mm
Pressure 100 Bar
Color Black and Orange

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

PP Non Return Valve

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Material PP
Media Water, Chemical
Color industrial grey
Diameter 4"

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

PP Pipe Elbow

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Usage/ Application Water
Pressure Rating 20 Bar
Material PP
Size 2 inch
Thickness 5mm
Finish Powder Coated

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.
View More Photos and Information

HDPE Pipe

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Size/Diameter 4 inch
Length of Pipe 6 m
Pressure Rating PN 6
Material Grade PE 63
Material HDPE
Color Black
Usage/Application Agricultural water supply
Shape Round
Country of Origin Made in India

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc
View More Photos and Information

SHITAL make Polypropylene Pipe

Vasai
Shital Poly Plast
Equipments
Packaging & Drums
Size/ Diameter 6 inch
Length of Pipe 3 Mtr & 6 Mtr
Usage/Application Chemical
Shape Round
Color Light Grey / Simona Grey / Natural
IS Code DIN 8077
Brand SHITAL
Pipe Class DIN 8077
Product Type Plastic Pipe
Temperature suitable up to 95 degree Centigrade
Material PP
Country of Origin Made in India

We "Shital Industries” are a Sole Proprietorship based firm, engaged as the foremost Manufacturer of PP & HDPE Pipes , Pipes-Fittings & Industrial Valves, Welding Rod, Solid Rods etc.


Additional Information:
  • Delivery Time: Ex. Stock
  • Packaging Details: Packed in Bundle of Length with strapping roll
View More Photos and Information
Contact Now
Have a question or feedback, let us know!

Please enter the string as shown above: