Benefits of using Plast Retard L
A more exact and predictable hydration point. This means you have superior control on the exact position of the knife point.
Since Plast Retard L provides a certain amount of lubricity, you will get a reduction in the quantity of water needed in the pin mill (5 to 10 % reduction).The saving in water directly translates to a proportional saving in the drying cost.,reducing water 5 to 10% & increases productivity of 5 to 10%.
METOLAT P 588 is an APEO free wetting agent in powder form. It is added to dry blends, dissolved in water before application. Adding METOLAT P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibres. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems it leads to a faster wetting of the pigment surface and prevents reagglomeration. Colour strength also increases.
High performance viscosity-enhancing agent for cement based materials
Kelcocrete DG Diutan gum is a water soluble biopolymer produced by fermentation and supplied in powder form. It hydrates in the mix water and acts as a viscosity enhancing agent with pseudoplastic/shear thinning rheology profile) to prevent bleeding and segregation.
Fields of Application
Self compacting concrete (SCC)
underwater concrete (anti wash-out)
flowable mortars and grouts
Poraver is light weight aggregates used in vairious industires like dry mortar, plasters , Canoe application, thermal insulating concrete, Architechtural Light weight concrete, porous light weight concrete, tiles adhesive, flooring , veneer stone , 3D priniting.
These aggregates are available in different Grain size of 0.1-0.3mm, 0.25-0.5mm, 0.5-1mm, 2-4mm etc depending on applications.
PeCeVis 100 PS is a granule powder based on a high-molecular weight synthetic copolymer.
It imparts a level of viscosity within a mix enabling the right balance between fluidity, passing ability and resistance to segregation - apparently opposing properties – to be achieved.
PeCeVis 100 PS is especially suitable for stabilization of self-compacting concrete with low fines content
High Tenacity Acrylic fibres which are used widely in Elastomeric Paints & Roof Coatings
These fibres when used in coatings improve:
Higher film ductility.
Advantages in sag reduction.
Crack Bridging properties.
Acrylic fibres provided by us are easily dispersed in all water-based coating systems.
Carboset® CA 1009 demonstrates excellent bitumen bleed-through resistance, making it ideal for use on new or weathered bitumen substrates. This can be applied over a variety of roof and facade construction materials, asphaltic roofing plies, concrete block, brick, stucco, EIFS and fiber-cement. It can be used as a topcoat or self-priming system, allowing customers to leverage a single polymer for multiple construction applications. Carboset® CA 1009 has excellent alkali resistance.
Plast Retard PE is a highly efficient setting retarder by increasing the workability time proportionately to the dosage.Plast Retard PE acts as retarder in the gypsum-water mixture slowing down the growth of the hydrate crystals.
The Plast Retard PE activity is characterized by the correlation between setting time and dosage and gives excellent performance at both high and low dosage rates.
Safe to use
Properties and Applications
METOLAT P 871 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application.
It reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.
Screeds (cement based)
Starvis 3003 F is a powder-based on a high-molecular-weight synthetic copolymer. Starvis 3003 F acts as a viscosity modifying agent to prevent bleeding and segregation.
Fields of Application
Starvis 3003 F is suitable for stabilization of very fluid cement and calcium sulfate-based mixtures, especially, e.g.
self-leveling underlayments (SLU)
Further suitable applications are, e.g.
cementitious self-leveling floor screeds
Long shelf life
No side effects
Fields of Application
AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
In some mortar systems AGITAN P 833 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for joint less flooring compounds.
Melflux 2651F is the most successful and highest quality Polycarboxylic Ether (PCE) Powder, sold in Indian market, for last thirteen years. Broadways Chemtech is the exclusive and authorised distributor for this product range in India. Melflux is the benchmark product used by all leading Indian companies producing 'Dry-mix mortars', 'Industrial grouts', 'Self Levelling flooring' etc.
Characteristics / Chemistry:
Melment® F 10 is a free-flowing, spray dried powder of a sulphonated polycondensation product based on melamine.
Fields of Application
Melment® F 10 is especially optimized for plastification and water reduction of cement and calcium sulphate based materials, e.g.
self-levelling underlayments (SLU)
cementitious floor screeds
cementitious self-levelling floor screeds
tile adhesives and joint fillers
A member is considered Trusted when at least 3 entities or companies doing business with them leave a positive feedback for this member. As simple as that. This help customers planning to do business with this member to build a trust based on past experiences of other customers with this member.
A member is a Verified member based on our experience with them by meeting them at their office, confirming thier Established Date and existing office. We do our due deligence to make sure the company exists and is in good standing by confirming their registration with the public data available for that company.
Chemical Market has been in the industry since almost 40 years. We owe our success to you and since the last few years things have been crazy for the world at large. The editorial independence has never been more important.
Our articles and press releases come from reliable sources and we keep delivering high impact trustworthy news, reviews and technical articles and reports free from commercial or political influence.
We believe everyone deserves equal access to accurate news and there are many news aggregator sites but we don't participate in those as they have a very broad criteria where not all news articles sites can participate and not all of them are true articles written for the purpose of knowledge but mostly are commercialized. We bring you news and information in the chemical industry and provide vital information to make decisions based on fact and not fiction.
Subscribe our magazine for as little as Rs.50 a month (Rs. 600/yr) or $1 a month ($11.99/yr)